How to Choose a Villa Interior Architect in Çayyolu, İncek and Gölbaşı?

What does a villa interior architect do in Çayyolu, İncek and Gölbaşı?

In a villa in Çayyolu, İncek or Gölbaşı, the interior architect prepares the layout, material and lighting decisions, follows the work on site and manages the process through to handover. In these three areas the villa is usually part of a named development, so the job accounts for both the house itself and the site's own rules.

In this office a villa interior architect job is shaped by where the house stands. In Çayyolu most villas sit in developments like Santra Villa; in İncek projects like Quarte Life stand out; in Gölbaşı houses around Ballıkpınar are common. All three are among Ankara's villa-dense areas, and this office works regularly in all of them.

Umut GÜRLER İç Mimarlık follows the same order in villas completed in these three areas, from survey to handover: measurements and levels, drawings and material list, site follow-up, and finally furniture and lighting. The order does not change by area; what changes is the site's working rule and the size of the house.

How do villa projects differ across these three areas?

Villas in Çayyolu, İncek and Gölbaşı belong to the same city, yet the development name, the plot size and the year of the finished job carry different numbers in each area.

In Çayyolu villa design the house is usually part of a development with several villas, such as Santra Villa; this means working hours, the noise rule and debris removal are set by the site's own management.

The İncek villa project in the table and the other two were run by the same office; in all three the material and lighting decisions followed the house's own plan, and the site's shared rule only affected the working calendar.

The three examples range from 250 to 450 square metres; that difference alone is the biggest single factor behind duration and the amount of material used. Same area or not, two villas of different sizes do not finish on the same calendar.

What to look for when choosing a villa interior architect?

The first thing to check when choosing a villa interior architect in Çayyolu, İncek or Gölbaşı is a real job that office has already completed in the same area.

The villa interior process from survey to handover runs in this order:

1. Look at an example job in the area, in person or in photos if possible.
2. Ask how long the site will take and what the site's working hours are.
3. Ask for the quote item by item; see in writing which item drives the cost and in which direction.
4. Ask whether a permit is required under Article 21/3 of the Zoning Law, and also ask the site management's own permission rule.

Skipping these four steps makes comparing quotes harder, and the site calendar only becomes clear after work starts, not on survey day. The order is the same in every area; only the site's rule and the size of the house change.

How does a villa project start in Çayyolu, İncek and Gölbaşı?

Before starting a new villa project in Çayyolu, İncek or Gölbaşı, a survey day is planned; that day shows the real state of the house, the plot and the site's rule.

This office works mainly in Çankaya, İncek, Beytepe, Bilkent, Beysukent, Çayyolu, Ümitköy, Çukurambar and Oran in Ankara; Çayyolu, İncek and Gölbaşı are the three villa-dense areas on that list. On survey day the house itself is discussed first, then the site's rule, and the budget last; the order is not reversed.

The first meeting is usually held at the house or on site; villa interior architect consulting reads the house's current state, the family's needs and the site's allowed working calendar at the same time. After the meeting the next step is the drawing and material list.

Umut GÜRLER is an interior architect and a graduate of Çankaya University Interior Architecture; he has worked since 2009 (more than 17 years) on villa, office and clinic interiors in Ankara, and his office is in Cepa Ofis Kule. The examples in this article come from villa projects he has completed.